Dishwasher Anti-Siphon Air Gap – Heavy duty model
Part No. 26-011HP
Function: Back flow prevention from sink drain to dishwasher
Finish: Chrome or Satin Nickel
Specification
Application | Connect 5/8” hose at one end & 7/8” drain hose at the other end
|
Material | Brass Cap Polypropylene plastic body
|
Finish | Green plastic body Chrome or Satin Nickel cap
|
Height | 9”
|
Weight | About 108g for Model A About 116g for Model B
|
Feature
* Provide two decorative caps for your choice.
1. Classical style decorative cap (Model A)
2. Modern style decorative cap (Model B)
(Please advise which cap you need. Each piece comes with a cap.)
* Provide two high quality electroplating finish for your choice.
1. Mirror-like chrome finish air gap cap
2. Artistic & classical brush nickel finish air gap cap
* Heavy duty construction
1. Heavy duty polypropylene green air gap body
2. Heavy duty brass decorative cap
Specification
Part | Dimension |
Cap (A) | Top OD: 1-5/8” Bottom OD: 1-11/16” Height: 2-3/16”
|
Cap (B) | Top OD: 1-5/8” Bottom OD: 1-7/8” Height: 2-3/8”
|
Body | Height: 8-1/4” Body OD: 1-3/16”
|
Counter thread Length | 1-7/8”
|
Connection | (1) 5/8” drain hose from dishwasher (2) 7/8” drain hose to disposal container or sink trap
|
Installation Drawing 
Installation Instructions
Step 1: Preparation
1. Remove the kits from the air gap, including decorative cap (A), top cover nut (B),
top retainer nut (C), and the counter gasket (D) while remain the bottom retainer nut (E) on the air gap.
2. Adjust the bottom retainer nut (E) for sink thickness.
Step 2: Install the kits
3. Install the air gap through the hole in your sink.
4. Place the counter gasket (D) into the air gap stem on the counter top.
5. Then, screw the top retainer nut (C) into the air gap stem above the counter gasket (D).
6. Hand-tighten the bottom retainer nut until all these kits are tight.
7. Connect the 5/8” inlet drain hose (F) to the dishwasher pump line.
8. Connect the 7/8” outlet drain hose (G) to either your garbage disposal or waste line.
Step 3: Finishing up
9. Secure the hose ends with hose clamps.
10. Screw on the top cover nut (B) and press on the decorative cap (A) on the top of the air gap.
Product description
Are Sheng is a professional plumbing product supplier in Taiwan. We provide various faucet repair parts, bathroom accessories and drainage kits. This heavy duty dishwasher air gap is one of our best sellers. The cover of the air gap is brass material. We provide two finishes. One is chrome, shining like a mirror. The other is brush nickel, giving you understated luxury feeling. The brass material decorative cap of this air gap makes your kitchen high class.
The green body is installed under your sink. The material is polypropylene (one of a plastic). The thickness is thicker than the white economical one. (We also have an
economical model #26-011PL dishwasher air gap, white body, plastic decorative cover.) The unit weight of this high quality dishwasher air gap is about 110g.
Also, we provide two styles of the decorative cap for this dishwasher air gap. One is the traditional style cap (model A). The other has streamline edge, modern style design (model B). Model B cap is slightly bigger than model A. The height of model A decorative cap is about 2-3/16” (55.5mm), and the height of model B decorative cap is about 2-3/8” (60mm). All these two cap styles are available in chrome finish and satin nickel finish.
Are Sheng also provides other related kitchen sink kits such as sink strainer, P-trap, pop-up drain, etc. For the products which you do not find on our website, you are welcome to send the product picture for us to quote.
Hi We also provide many other drainage kits such as sink strainer, sink faucet, sink basket, water supply line... You are welcome to browse our official website (www.aresheng.com.tw) for more information. |
